Fisher & Paykel DCS RGS Series Service Manual page 32

SERVICING THE COMPONENTS
REMOVING THE GRIDDLE BURNER & IGNITOR
b) Slide the griddle burner back so that the air shut-
ter is off the orifi ce of the single thermal valve,
and remove the burner.
Air Shutter Orifi ce
9. To remove the griddle burner ignitor:
a) Remove the griddle burner (see step 8).
b) Disconnect the white ignitor wire from the single
thermal valve terminal.
c) Twist the ceramic nut off the end of the wires
and remove the ignitor wire.
d) Remove the two screws and nuts from the ig-
nitor bracket and remove the ignitor.
White Wire Ceramic Nut
Ignitor Screws & Nuts
31
Ignitor