Removing An Oven Lamp Assembly - Fisher & Paykel DCS RGS Series Service Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Turn off the gas and disconnect power to the range.
2. Remove the oven door (see page 78 for the door re-
moval procedure).
3. Remove the racks from the oven.
4. Unscrew the lens and bulb from the lamp assembly.
Remove Lens & Bulb
SERVICING THE COMPONENTS

REMOVING AN OVEN LAMP ASSEMBLY

5. Slide the fl at spring out of the lampholder.
46
Remove Flat Spring