Fisher & Paykel DCS RGS Series Service Manual page 76

INSTALLING THE OVEN RACKS
1. Hold the rack with the back safety rail in the up position
and towards the rear of the oven. Slip it into the oven
so the rack slides are between the rack and the rack
guides.
2. As you slide the rack into the oven, tip the front of the
rack up slightly, so that the safety stops on the back
of the rack clear the rack slides. The safety stops keep
the rack from sliding out of the oven when pulled for-
ward.
USE AND CARE
BEFORE USING THE RANGE
Rack Slide
Rack
Guide
Safety Stop
Rack Positions
4
3
2
1
TO REMOVE OR REPOSITION THE OVEN RACKS
1. Pull the rack forward as far as the stop.
2. Lift the front of the rack up so the safety stops clear the
rack slides.
3. Pull the rack forward and remove it.
75
4
3
2
1