Fisher & Paykel DCS RGS Series Service Manual page 46

REMOVING THE INFRARED (IR) BURNER & IGNITOR
10. To remove the IR Ignitor, remove the two screws for the
ignitor plate at the rear of the oven cavity, and remove
the ignitor.
IR Ignitor Plate Screws
SERVICING THE COMPONENTS
11. To remove the IR burner, remove the 10 screws around
the outside of the IR burner, (support the burner with
one hand so that it does not fall). Pull the burner for-
ward and out of the oven.
10 IR Burner Screws
45
IR Burner