Fisher & Paykel DCS RGS Series Service Manual page 58

REMOVING THE OVEN DOOR HANDLE, HINGE, AND WINDOW PACK
6. To remove the door hinge:
a) Loosen the indicated side hinge bracket screw
and fl at washer.
b) Remove the two bottom hinge screws and lift
the hinge out of the door liner.
Side Hinge Screw
Bottom Hinge Screws
7. To remove the window pack:
a) Loosen the screws on the four window pack
support brackets.
b) Remove the four top screws from the insulation
retainer and remove the retainer.
Window Pack Support Brackets
Top Insulation Retainer Screws
SERVICING THE COMPONENTS
c) Remove the large insulation from the door
Large Insulation
d) Remove the pieces of cut insulation from the
door liner.
Cut Insulation
e) Remove the four nuts from the window pack
and remove the pack from the door liner.
Window Pack Nuts (2 of 4)
57