Removing A Main Jet Holder & A Simmer Jet Holder - Fisher & Paykel DCS RGS Series Service Manual

REMOVING A MAIN JET HOLDER & A SIMMER JET HOLDER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical
shock.
1. Turn off the gas and disconnect power to the range.
2. Remove the burner assembly for the main jet holder
or simmer jet holder you wish to service (see page 47
for the procedure).
Sealed Burners
SERVICING THE COMPONENTS
3. To remove a main jet holder:
a) Remove the 9/16" gas line nut.
b) Remove the 1-1/8" nut and remove the main jet
holder from the bracket.
Main Jet Holder Nut
4. To remove a simmer jet holder:
a) Remove the 3/8" gas line nut.
b) Remove the 5/8" nut and remove the simmer jet
holder from the bracket.
Gas Line Nut
Simmer
Jet Holder
25
Gas Line Nut
Simmer Jet Holder Nut
Main Jet
Holder