Removing The Oven Door Handle, Hinge, And Window Pack - Fisher & Paykel DCS RGS Series Service Manual

REMOVING THE OVEN DOOR HANDLE, HINGE, AND WINDOW PACK

1. Remove the oven door (see page 78 for the door re-
moval procedure), and position it on a padded surface
with the hinges pointing up.
CAUTION:
Use hand protection when releasing the
spring tension on the hinge in the next
step.
2. Press down on the hinge and unlock the brass clamp
from the hinge arms, then slowly allow the spring ten-
sion to move the arm back to its normal position.
Press Down On Hinge & Release Brass Clamp
SERVICING THE COMPONENTS
3. Remove the fi ve top and fi ve bottom screws from the
door.
4. Remove the outer door skin and handle from the door
liner assembly.
5 Bottom Screws
5. To remove the door handle, remove the two door
handle screws (two on each side) from the outer door
skin.
4 Handle Screws On Door Skin
56
5 Top Screws