Table of Contents
Advertisement
CD Setup Expert
Press
additional parameters to be configured:
Measurement Points
Displays the acquisition points on the Delay curve (represented by black crosses).
Yes
No
Show approximation formula
Displays the resulting approximation equation and the correlation coefficient on the
upper left side of the trace.
Yes
No
Alarms parameters
In the Setup menu, press Alarms.
Figure 34
CD Alarms parameters
Alarm Status
None
Chapter 4 CD measurements using phase shift method
to switch to Expert mode
All the acquisition points are displayed.
No acquisition points visible
Equation is displayed.
Equation is not visible.
No alarm management.
User Manual
700MAN902 Rev. 000
Configuring the CD test
and access
57
Advertisement
Table of Contents
