Saving Configuration In A File - Viavi ODM V2 User Manual

Chapter 3 Attenuation profile
Configuring the AP test
Figure 23 Display parameters
Wavelength
It enables to configure the range of wavelengths to be displayed on the graph and in the
table of results.
Full
S+C+L Band
C+L Band
Manual
ITUCWDM
ITUDWDM
Channel spacing can be fixed at: 25 GHz, 50 GHz, 100 GHz or 200 GHz.
Telecom
Inc.Wavelength
Defines the spacing between 2 consecutive measurement points displayed on the graph
and in the table of results.

Saving configuration in a file

Once parameters have been configured, they can be kept in memory and saved in a
configuration file.
38
Displays results along the full available wavelength range
Displays results along S, C + L bands.
Displays results along C + L bands.
Displays results between 2 user defined wavelengths. The user must
then select the Min. wavelength and Max. wavelength parameters.
Displays the ITU-T G.694.2 CWDM channels exclusively
Displays the ITU-T G.694.1 DWDM channels exclusively
Displays 4 wavelengths: 1310 / 1480 / 1550 / 1625 nm
User Manual 700MAN902 Rev. 000