Table of Contents
Advertisement
Figure 37
Setup CD Reference Measurement
3
In
Take
The line BBS Serial Number turns active.
4
Enter a serial number for the broadband source used.
5
Press the button S
A bargraph is displayed until the end of the acquisition.
Once the reference is correct, the message Valid Reference is displayed in
green, and related information are displayed in the upper blue part of the screen:
date and time of reference acquisition / Source type / serial number.
Figure 38
Example of a reference for a broadband source
If the reference measurement does not provide a correct result, check the
following potential causes:
Chapter 4 CD measurements using phase shift method
Reference, select
/S
TART
TOP
User Manual
Yes
to start the reference of the broadband source.
700MAN902 Rev. 000
CD Reference measurement
61
Advertisement
Table of Contents
