Table of Contents
Advertisement
Chapter 3 Attenuation profile
Display of AP results
For a AP measurement, two different graphs may be displayed.
You may switch from the «Profile» view to the final «Spectrum» view using the upper
tabs.
•
Spectrum: displays the final spectrum.
.
Figure 29
Example of a spectrum view after a measurement
•
Profile: it provides the difference between the final spectrum and the reference
spectrum of the broadband source- that's the resulting attenuation profile (see
figure
Cursor and Zoom functions
Position the cursor
•
To move the cursors on the trace, grab and and move it on trace
or
Click on one results in the table to position the cursor on the trace at the desired
value.
The coordinates of cursor intersection with the trace are indicated above the trace.
46
"Example of a AP result" on page
User Manual
45).
700MAN902 Rev. 000
Advertisement
Table of Contents
