Loading A Configuration File - Viavi ODM V2 User Manual

This configuration file can then be recalled in order to be recalled for future AP acquisi-
tions.
To save parameters in a configuration file:
To save parameters in a configuration file:
1 If necessary, press Setup to open the Setup menu.
2 Select one parameter in one of the setup page (acquisition, link..)
3 Press Save Config. key
4 Enter a name for the configuration file using the edition keypad.
NOTE
Configuration file is saved in the directory disk/config/AP.
5 Press
A sound is emitted to indicate the file is saved.
The configuration file is saved with the extension ".fo_cfg" (icon
recalled at any time from the Explorer page.

Loading a configuration file

To load the configuration file to be used for AP test:
1 Press Setup key.
2 Press Load
3 In the Explorer, select the desired file configuration and press Load.
A beep is emitted to validate the selection of the configuration file.
The software automatically brings you back to setup page.
NOTE
Most of the configuration files are available into the Platform in disk/con-
fig/AP.
to validate.
Config. key
User Manual
Chapter 3 Attenuation profile
.
.
700MAN902 Rev. 000
Configuring the AP test
) and can be
39