Chapter 2 Polarization Mode Dispersion Measurement
Configuring the PMD test
Location B
The name of the Location B of the link may be entered here, using the onscreen
keyboard.
Technician Id
The user can set a name here.
Job Id
Enter a job identifier, number or code.
Comment
Click on Comment text box to enter any additional information relevant to the test.
Report parameters
The Report storage parameters must be also configured, in order to define how and
where the results will be saved in the file system of the equipment.
In the Setup menu, press Report.
Figure 9
Report parameters
16
User Manual
700MAN902 Rev. 000