Reference; Acquisition Parameters - Viavi ODM V2 User Manual

Link Description Change Fiber Nbr
Report
In standard

Reference

Last Reference / BBS Type / BBS Serial Number
These parameters provide the relevant information related to the Broadband source
(BBS) referencing.
These parameters cannot be modified as they are automatically generated after a refer-
ence measurement (see

Acquisition parameters

In the Setup menu, press Acquisition.
Figure 21 Acquisition parameters
Acquisition band
OESCL
SCL
File(s) save in
Filenaming
Auto store
mode, you can set the parameters below.
"Performing the reference" on page
measurement performed over the full wavelength range (OESCL
bands).
measurement performed over a wavelength range limited to S,C and
L bands
User Manual
Chapter 3 Attenuation profile
Increment
[Current Dir]
[Cable_Id][Fiber_Num][Direction]
Yes
700MAN902 Rev. 000
Configuring the AP test
40)
35