•
So: Slope at L0
Cursor and Zoom functions
Position the cursor
•
To move the cursors on the trace, grab and move it on trace
or
Click on one results in the table to position the cursor on the trace at the desired
value.
The coordinates of cursor intersection with the trace are indicated above the trace.
Zooming on trace
•
In order to zoom in/out on, click on
trace area to be zoomed.
or
Press
Saving the trace and generating a report
Once the results page is displayed, the trace can be saved and a report can be gener-
ated directly from the results screen.
Saving results and creating a report
To save the trace (and generate a report):
NOTE
Whatever is the view selected in Results page (Delay, Dispersion or
Slope), the report is always generated with the Dispersion trace.
1
Press Fast Report menu key
A menu displays under the trace.
2
In the menu, configure the file saving (and the report)
Chapter 4 CD measurements using phase shift method
to do an automatic zoom on trace.
User Manual
Saving the trace and generating a report
or
to zoom in or out and click on the
.
700MAN902 Rev. 000
67