Table of Contents
Advertisement
Chapter 2 Polarization Mode Dispersion Measurement
Configuring the PMD test
Figure 11
Filenaming - Keyboard (auto)
or
Click on
Fiber[Cable_Id]_[Fiber_Num]_[Lambda]_[Direction]
Press
Press
The name of the file is displayed in grey under Filenaming parameter
Auto Store
Select Yes to store automatically the trace or traces resulting from each acquisition
according to the filenaming rules. If the filename already exists, the user will be
prompted to overwrite the "old" result or discard the current result and keep the "old" file
Select Confirm if alarm = Fail to display a confirmation dialog box if a value exceeds
alarm thresholds, and to be able to choose to save or not the trace.
If no alarm is detected on trace, it is automatically stored.
Report As
Select the report format to be generated:
txt file
pdf file
If all parameters are defined with No, only the .pmd file will be saved.
18
to apply the name by default to the file:
to validate.
to modify the keyboard language: English / French / German.
select Yes to generate a txt file of the results.
select Yes to generate a report in a pdf file.
User Manual
700MAN902 Rev. 000
Advertisement
Table of Contents
