Expansion Card Installation; Installing An M.2 Solid State Drive - Supermicro SuperServer SYS-741P-TR User Manual

3.5 Expansion Card Installation

Installing an M.2 Solid State Drive

The X13DEI/X13DEI-T can accommodate two M.2 solid state drives (SSDs). Each M.2 socket
supports NVMe PCIe 4.0 x4 (32 Gb/s) SSD cards in the 2280 or 22110 form factors. The
22110 form factor is recommended because the appropriate standoff comes pre-installed on
the motherboard.
Caution: Use industry-standard anti-static equipment, such as gloves or wrist strap, and
follow precautions to avoid damage caused by ESD.
M.2-C1
M.2-C2
Note: JM2_2 cannot be used if a graphics card is installed in any of the PCIe slots 1-5.
Chapter 3: Maintenance and Component Installation
LED6
(UID-LED)
BMC
LAN
CTRL
LEDBMC
FAN6
JPCIE6
JPCIE1
JPCIE2 JPCIE3 JPCIE4 JPCIE5
M.2-C1 (NVME ONLY)
BIOS LICENSE
IPMI CODE
SAN MAC
JBT1
PCH
USB0/1
BT1
USB7/8 (3.0)
USB2
JSTBY1
LED7
M.2-C2
(NVME ONLY)
FAN4 FAN3
FANA
FANB
Figure 3-3. M.2 Locations
64
COM1
VGA
JUIDB1
USB5/6 (3.0)
FAN5
LAN2 LAN1
USB3/4 (3.0)
BMC_LAN
CPU2
MAC CODE
X13DEI(-T)
BAR CODE
REV:1.01
DESIGNED IN USA
JNVME2
JPI2C1
LED
PWR
CPU1
FAN1
JNVME3
FAN2