Supermicro SuperServer SYS-741P-TR User Manual page 29

Chapter 2: System Installation
Installing the Inner Rails to the Chassis
1. Attach the handles to the front of the chassis with three screws each.
2. Identify the left and right inner rails. They are labeled on the rails and in the figure
below.
3. Align each rail with the screw holes along the side of the chassis.
4. Screw the rails securely to the side of the chassis.
L
1
Screw for Handles
R
Screw for Inner Rails
1
Figure 2-6. Installing the Handles and Inner Rails to the Chassis
4
Figure 2-7. Handles and Inner Rails Installed to the Chassis
29