Removing The Cpu Carrier Assembly From The Phm - Supermicro SuperServer SYS-741P-TR User Manual

Removing the CPU Carrier Assembly from the PHM

To remove the CPU carrier assembly from the PHM, please follow the steps below:
1. Detach the four plastic clips (marked a, b, c, and d) on the CPU carrier assembly from
the four corners of the heatsink (marked A, B, C, and D) as shown below.
2U Heatsink
CPU Carrier Assembly
(Component Side View)
c
Pin 1
a
C
A
SP XCC
Note: The process of removing the CPU carrier assembly from the PHM is the same
for SP XCC and SP MCC CPU. The graphics above show the SP MCC as an example.
Chapter 3: Maintenance and Component Installation
b
d
B
D
Heatsink (Bottom View)
57
CPU Carrier Assembly
(Component Side View)
b
c
Pin 1
a
C
A
SP MCC
d
B
D