Supermicro SuperServer SYS-741P-TR User Manual page 32

3. Insert and tighten the thumbscrews that hold the front of the system to the rack.
Figure 2-11. Securing the System to the Rack
Note: Figure is for illustrative purposes only. Always install systems to the bottom of a rack
first.
Warning: Stability hazard. The rack stabilizing mechanism must be in place, or the
rack must be bolted to the floor before you slide the unit out for servicing. Failure to
stabilize the rack can cause the rack to tip over.
When initially installing the system to a rack, test that the rail locking tabs engage to
prevent the system from being overextended. Have a rack lift in place as a precaution
in case the test fails.
Chapter 2: System Installation
32