Chapter 1 Introduction; Overview - Supermicro SuperServer SYS-741P-TR User Manual

1.1 Overview

This chapter provides a brief outline of the functions and features of the SuperServer SYS-
741P-TR/741P-TRT. It is based on the X13DEI/X13DEI-T motherboard and the CSE-745BTS-
R1K23BP chassis.
The following provides an overview of the specifications and capabilities.
Motherboard
Chassis
Processor
Memory
Drive Support
Expansion Slots
I/O Ports
System Cooling
Power
Form Factor
Note: A Quick Reference Guide can be found on the product page of the Supermicro website.
The following safety models associated with the SYS-741P-TR/741P-TRT have been certified
as compliant with UL or CSA: 745-R12X13, 745-12, and 745-12.
Chapter 1
Introduction
System Overview
X13DEI/X13DEI-T (see the
CSE-745BTS-R1K23BP
Dual Socket E (LGA4677) 4th Generation Intel® Xeon® Scalable processors with
up to 300 W TDP
Supports up to 4TB memory capacity with 16 DIMMs of 256 GB 3DS RDIMM/
RDIMM DDR5 ECC memory for up to 4800 MT/s
Eight hot-swap 3.5"/2.5" SATA3 drives
Two PCIe 4.0 NVMe M.2 2280/22110 connectors
Two SuperDOM headers
Optional:
Four NVMe Gen5 drives
Two PCIe 5.0 x8 slots (full-height, full length)
Four PCIe 5.0 x16 slots (full-height, full length)
Two PCIe 4.0 x2 M.2 slots (supports M-Key 2280 and 22110)
Two PCIe 5.0 x8 MCIO ports (supported by four NVME connections)
Two LAN ports 1G (Broadcom 5720) / 10G (Broadcom 57416)
One rear COM port
One rear VGA port
Four rear USB 3.0 ports
Two front USB 3.0 ports
One TPM 2.0 port
One RoT port
One dedicated IPMI LAN port
Three 8 cm internal hot-swappable fans, two 8 cm rear hot-swappable fans, one air
shroud, two passive CPU heatsinks (P/N SNK-P0088P)
Two 1200 W Redundant Titanium Level Power Supplies
Note: Full redundancy will be based on system configuration and application load.
4U: (WxHxD) 7 x 17.8 x 25.5 in. (178 mm x 452 mm x 648 mm)
9
Network Connections for motherboard configuration)
Chapter 1: Introduction