Air Shroud - Supermicro SuperServer SYS-741P-TR User Manual

Air Shroud

The air shroud balances the system's thermal performance and should be in place during
normal operation. Under most circumstances you will not need to remove the air shroud to
perform any service on the system. However, if you wish to temporarily remove it, please
follow the procedure below.
Removing the Air Shroud
1. Pull out the blue tab at the front of the air shroud to unlock it.
2. At the front of the air shroud, pull the locking tabs out of the slots.
3. Lift the front of the air shroud up at about a 15 degree angle and gently pull the locking
tabs out of the back of the air shroud.
4. Lift the air shroud up and out of the chassis.
3
Chapter 3: Maintenance and Component Installation
4
2
Figure 3-15. Removing the Air Shroud
75