Supermicro SuperServer SYS-741P-TR User Manual page 27

Assembling the Outer Rails and the Rack Brackets
Each outer rail requires assembly with the rack brackets before mounting onto the rack.
1. Identify the two long brackets for the rear of each rail and the two short brackets for the
front of each rail. The brackets are also left and right specific.
2. Secure the short bracket onto the outer rail with screws at the side as shown below.
3. Place the long bracket onto the outer rail at the approximate position to fit your rack.
Use two or three screws. Leave the screws just loose enough for the bracket to slide
back and forth slightly.
Note: The short bracket is secured firmly to the rail. However, the long bracket is slightly loose.
2
Figure 2-4. Assembling the Outer Rails
27
Chapter 2: System Installation
3