3.2 Accessing the System
The CSE-745BTS-R1K23BP has removable side and front covers for interior access.
Removing the Side Cover
1. Begin by
removing power
2. Push the cover latch button to release the latch handle.
3. Pull the cover off the chassis using the latch handle.
Warning: Except for short periods of time, do not operate the system without the cover in place.
The chassis cover must be in place to allow for proper airflow and to prevent overheating.
Cover Latch
Handle
Removing the Front Cover
The cover can be locked to prevent unauthorized access. The key to this lock is shipped
with the system.
1. Unlock the front cover using the key shipped with the system.
2. Holding the key in the lock, swing the front cover open.
Chapter 3: Maintenance and Component Installation
from the system.
Side Cover
Figure 3-1. Removing the Side Cover
37
Cover Latch
Button