Dimm Installation - Supermicro SuperServer SYS-741P-TR User Manual

DIMM Installation

1. Insert the desired number of DIMMs into the memory slots based on the recommended
DIMM population tables in the previous section. Locate DIMM memory slots on the
motherboard as shown on the next page
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the receptive point on the memory slot.
4. Align the notches on both ends of the module against the receptive points on the ends
of the slot.
5. Push both ends of the module straight down into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to secure the DIMM module into the slot.
Chapter 3: Maintenance and Component Installation
Key
Notches
62