Supermicro SuperServer SYS-741P-TR User Manual page 72

Installing a 3.5" Drive
1. Remove the screws from the drive carrier.
2. Install the 3.5" drive into the drive carrier and reinstall the screws.
Figure 3-12. Installing or Removing a 3.5" Drive
Note: Enterprise level hard disk drives are recommended for use in Supermicro chassis and
systems. For information on recommended HDDs, visit the Supermicro website at
supermicro.com/products/nfo/files/storage/SBB-HDDCompList.pdf
Chapter 3: Maintenance and Component Installation
72
http://www.