Supermicro SuperServer SYS-741P-TR User Manual page 71

Removing 2.5" Drive from the Converter Tray
1. Press down on the release tab untils the drive pops up from the tray.
2. Remove the 2.5" drive from the tray.
Figure 3-10. Removing a 2.5" Drive from the Carrier
Removing the Converter Tray
1. Remove the screws from the carrier.
2. Remove the converter tray as shown below.
Figure 3-11. Removing the Converter Tray
Chapter 3: Maintenance and Component Installation
1
71