Drive Carrier Indicators - Supermicro SuperServer SYS-741P-TR User Manual

Drive Carrier Indicators

Each drive carrier has two LED indicators: an activity indicator and a status indicator. The
meaning of the status indicator is described in the table below.
Color
Blue
Activity LED
Blue
Red
Red
Red
Status LED
Red
Red
Green
Amber
Chapter 3: Maintenance and Component Installation
Drive Carrier LED Indicator
Blinking Pattern
Solid On
Blinking
Solid On
Blinking at 1 Hz
Blinking with two blinks and one
stop at 1 Hz
On for five seconds, then off
Blinking at 4 Hz
Solid On
Blinking at 1 Hz
69
Behavior for Device
SAS/NVMe drive installed
I/O activity
Failure of drive with RSTe support
Rebuild drive with RSTe support
Hot spare for drive with RSTe support
(not supported in VMD mode)
Power on for drive with RSTe support
Identify drive with RSTe support
Safe to remove NVMe device (not
supported in VMD mode)
Attention state---do not remove NVMe
device (not supported in VMD mode)