Preparing The Server For Rackmounting - Supermicro SuperServer SYS-741P-TR User Manual

2.4 Preparing the Server for Rackmounting

Removing the Top Tower Cover
1. Locate the blue cover lock at the rear of the cover.
2. Slide the lock to the right and push the cover forward.
3. Lift the top cover off the chassis.
Figure 2-1. Removing the Top Tower Cover and Feet
Removing the Chassis Feet
1. Lay the chassis on its side.
2. Remove the screws holding the chassis feet in place.
3. Each foot has a foot lock tab at the center. Use a flat head screwdriver to gently lift the
foot lock upward. Slide the foot toward the rear of the chassis.
Chapter 2: System Installation
25