Table of Contents
Advertisement
SuperStorageServer SSG-6019P-ACR12L User's Manual
PCI Expansion Card Installation
The chassis supports two full height and one low profile PCI-E expansion cards.
Installing an Expansion Card
1. Power down the system as described in Section 3.1 and remove the rear cover.
2. Remove the riser card bracket from the system.
3. Install the add-on card in your preferred slot on the riser bracket and secure with the
provided screws.
4. Insert the riser card bracket into the motherboard expansion slot while aligning the riser
card bracket with the rear of the chassis.
5. Secure the bracket with the provided screws.
Two Full Height,
Half Length Cards
Figure 3-3. PCI-E Expansion Cards
Riser Card Bracket
38
Low Profile Card
Advertisement
Table of Contents
