Dimm Installation; Dimm Removal - Supermicro A+ AS -2015A-TR User Manual

DIMM Installation

1. Insert the desired number of DIMMs into the
memory slots. See
on memory population guidelines.
2. Push the release tabs outwards on both ends
of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the module
against the receptive points on the ends of
the slot.
5. Press both ends of the module straight down
into the slot until the module snaps into place.
6. Press the release tabs to the lock positions to
secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the DIMM module to unlock it. Once the DIMM module
is loose, remove it from the memory slot.
Warning! To avoid causing any damage to the DIMM module or the DIMM socket, do not use
excessive force when pressing the release tabs on the ends of the DIMM socket. Handle DIMMs
with care. Be aware and follow the ESD instructions given at the beginning of this chapter.
Chapter 3: Maintenance and Component Installation
Memory Support for details
34
Key
Receptive Point
Notches
Release Tabs
Push both ends
straight down into
the memory slot.