Dimm Installation; Dimm Removal - Supermicro X13SEFR-A User Manual

Super X13SEFR-A User's Manual

DIMM Installation

1. Insert the desired number of DIMMs
into the memory slots based on the
Recommended Memory Population Guide
tables on pages 31 and 32.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Push both ends of the module straight
down into the slot until the module snaps
into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the DIMM
module to unlock it. Once the DIMM module is
loosened, remove it from the memory slot.
P1 - AIOM PCIe5.0 x16
MH11
MH16
JPW1
BT1
SATA9
SATA1
SATA2
MH9
MH8
JNVME3 JNVME4
FAN4 FAN3
MH1
Release Tabs
Push both ends
straight down into
the memory slot.
34
VGA
MH3
UID_LED
USB0/1(3.0) BMC_LAN
MH4 SRW4 SRW2
SRW3 SRW1
MH6
JRK1
MH15
J18 J17
MH17
LE6
MH10
LED1
MH13
SATA8
JAIOMSB1
JPWRMAX1
X13SEFR-A
REV: 1.01 JBT1 MH7 MH5
DESIGNED IN USA CMOS CLEAR
BIOS LICENSE
MH14
MH12 JPW2
NVME5
JPW3
FAN2
MH2
FAN1
Notches