Table of Contents
Advertisement
DIMM Installation
Warning! Due to thermal limitations, SYS-E302-13AD only supports DIMMB1 slot.
1. Install the SODIMM into the DIMMB1 memory slot.
2. Align the key on the bottom of the SODIMM module against the receptive point on the
memory slot. Take note of the notches on the side of the DIMM module and of the locking
clips on the socket to avoid causing damage.
Module Key
Socket Key
3. Press the SODIMM module straight down into the socket with both hands until it is securely
seated in the socket. The side clips will automatically lock the module into place.
DIMM Removal
Push the side clips away from the module to release it from the socket.
Chapter 3 Maintenance and Component Installation
Module Notch
26
Advertisement
Table of Contents
