Table of Contents
Advertisement
DIMM Installation
1. Insert DIMM modules in the following order:
DIMMA2, DIMMB2 and then DIMMA1,
DIMMB1.
2. Push the release tabs outwards on both ends
of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the module
against the receptive points on the ends of
the slot.
5. Push both ends of the module straight down
into the slot until the module snaps into
place.
6. Press the release tabs to the lock positions to
secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the DIMM
module to unlock it. Once the DIMM module is
loosened, remove it from the memory slot.
Chapter 3: Maintenance and Component Installation
Release Tabs
44
Notches
Push both ends
straight down into
the memory slot.
Advertisement
Table of Contents
Troubleshooting
