Table of Contents
Advertisement
Multi 3410
Temperature
measurement
Preparatory activities
ba75863e02
12/2009
4.6
pH value
4.6.1 General information
You can measure the following variables:
pH value [ ]
Sensor voltage [mV]
Note
The sensor connection and the USB-B (device) interface are galvani-
cally isolated. This enables interference-free measurements in
grounded measuring media.
For reproducible pH measurements, it is essential to measure the tem-
perature of the test sample.
IDS sensors measure the temperature with a temperature sensor inte-
grated in the IDS sensor.
Perform the following preparatory activities when you want to measure:
1
Connect the IDS pH sensor to the meter.
The pH measuring window is displayed.
2
If necessary, select the measured parameter with <M>.
3
If necessary, calibrate or check the IDS pH sensor.
Operation
35
Advertisement
Table of Contents
