Table of Contents
Advertisement
Operation
30
Clock function
Date format:
Date:
Time:
22.09.2009 08:00
3
Select and confirm the Time menu with < >< > and <MENU/
ENTER>.
The hours are highlighted.
4
Change and confirm the setting with < >< > and <MENU/
ENTER>.
The minutes are highlighted.
5
Change and confirm the setting with < >< > and <MENU/
ENTER>.
The seconds are highlighted.
6
Change and confirm the setting with < >< > and <MENU/
ENTER>.
The time is set.
7
If necessary, set the Date and Date format. The setting is made
similarly to that of the time.
8
If necessary, select and set the Date with < >< > and
<MENU/ENTER>.
9
To make further settings, switch to the next higher menu level
with <ESC>.
or
Switch to the measured value display with <M>.
The instrument is in the measuring operating mode.
dd.mm.yy
30.09.2009
14:53:40
Multi 3410
ba75863e02
12/2009
Advertisement
Table of Contents
