Manual Storage - wtw Multi 3410 Operating Manual

Operation
If the storage is full
72

4.9.1 Manual storage

You can transmit a measurement dataset to the data storage as fol-
lows. The dataset is at the same time output to the interface:
1 Press the <STO> key shortly.
The menu for manual storage appears.
Manual data storage 4 From 200
30.09.2009 11:24:16
pH 7.000 24.8 °C AR +++
ID number:
Continue
22.09.2009 08:00
2 If necessary, change and confirm the ID number (1 ... 10000)
with < >< > and <MENU/ENTER>.
The dataset is stored. The meter switches to the measured
value display.
When all memory locations are occupied, it is not possible to continue
storing. Then you can e.g. transmit the stored data to a PC or a USB
flash drive (see section 4.9.3) and subsequently erase the storage (see
section 4.9.4).
1
ba75863e02
Multi 3410
12/2009