Data Storage - wtw Multi 3410 Operating Manual

Multi 3410
Measurement dataset
Storage locations
ba75863e02 12/2009
4.9

Data storage

You can transmit measured values (datasets) to the data storage:
Manual storage (see section 4.9.1)
Automatic storage at intervals (see section 4.9.2)
Each storage process transmits the current dataset to the interface at
the same time.
A complete dataset consists of:
Date/time
Meter name, series number
Sensor name, series number
ID number
Measured value of the connected sensor
Measured temperature value of the connected sensor
AutoRead info: AR appears with the measured value if the Auto-
Read criterion was met while storing (stable measured value). Oth-
erwise, the AR display is missing.
Calibration evaluation:
- 4 levels (+++, ++, +, -, or no evaluation) or
- QSC (percentage)
The Multi 3410 meter has two measurement data memories. The mea-
sured values recorded either manually or automatic are stored sepa-
rately in individual measurement data memories.
Storage
Manual data storage
Automatic data storage
Maximum number of datasets
200
5000
Operation
71