wtw Multi 3410 Operating Manual page 10

Overview
Function display
indicators
10
AutoCal Calibration with automatic buffer recognition, e.g.
e.g. TEC with the buffer set: Technical buffers
ConCal Calibration with any buffers
Error An error occurred during calibration
AR Stability control (AutoRead) is active
HOLD Measured value is frozen (<AR> key)
Batteries are almost empty
The batteries are being charged
Data are automatially output to the USB-B interface
at intervals
Data are output to the USB-A interface (USB flash
drive)
Power supply via the USB-B interface
Batteries are not being charged
Multi 3410
ba75863e02 12/2009