Transmitting Data (Usb Interface); Options For Data Transmission - wtw pH/ION 7320P Operating Manual

pH/ION 7320
ba75935e04 12/2017
11

Transmitting data (USB interface)

11.1 Options for data transmission

Via the USB interface you can transmit data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data Control
Current Manual
datasets of the
sensors
indicated on
the display
Automatic, at
intervals
Stored mea- Manual
sured values
Calibration Manual
records
Automatic
The following rule applies: With the exception of the menus, shortly
pressing the <F2>[USB output] key generally outputs the display
contents to the interface (displayed measured values, measure-
ment datasets, calibration records).
Transmitting data (USB interface)
Operation / description
 With <F2>/[USB output].
 Simultaneously with every manual
data storage process (see section
10.1 M
ANUAL DATA STORAGE
78).
 With <F2__>/[USB output].
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic data storage process (see
section 10.2 A
UTOMATIC DATA
STORAGE AT INTERVALS
 Displayed dataset with <F2>[USB
output] after calling up from the
storage.
 All datasets with the Output to USB
function.
(see section 10.3.1 E
MEASUREMENT DATA STORAGE
page 81).
 Calibration record with <F2>/[USB
output]
(see section 6.2.6 C
, page 38).
DATA
 At the end of a calibration proce-
dure.
, page
, page 79).
DITING THE
,
ALIBRATION
84