Transmitting Data (Usb Interface); Options For Data Transmission - wtw Oxi 7310 Operating Manual

Oxi 7310
ba75931e03 12/2011
8

Transmitting data (USB interface)

8.1

Options for data transmission

Via the USB interface you can transmit data to a PC. The following table shows
which data are transmitted to the interface in which way:
Data Control
Current Manual
measured val-
ues of all con-
nected
sensors
Automatic, at
intervals
Stored mea- Manual
sured values
Calibration Manual
records
Automatic
The following rule applies: With the exception of the menus, shortly
pressing the [USB output] / <F2> key generally outputs the display
contents to the interface (displayed measured values, measure-
ment datasets, calibration records).
Transmitting data (USB interface)
Operation / description
 With <F2>/[USB output].
 Simultaneously with every manual
storage process (see section 7.1
M , page 35).
ANUAL STORAGE
 With <F2__>/[USB output].
Then you can set the transmission
interval.
 Simultaneously with every auto-
matic storage process (see section
7.2 A
UTOMATIC STORAGE AT INTER
, page 36).
VALS
 Displayed dataset with <F2>[USB
output] after calling up from the
storage.
 All datasets with the Output to USB
function.
Details (see section 7.3.1 D
AND EDITING THE MEASUREMENT DATA
, page 38).
STORAGE
 Calibration record with <F2>[USB
output].
Details (see section 5.2.6 C
, page 28).
TION DATA
 At the end of a calibration proce-
dure.
-
ISPLAYING
-
ALIBRA
41