Table of Contents
Advertisement
Operation
Starting the automatic
storage function
Terminating the
automatic storage
function prematurely
74
To start the automatic storage function, select Continue with < >< >
and confirm with <MENU/ENTER>. The meter switches to the mea-
sured value display.
0d03h00min
Info
30.09.2009 08:00
The active automatic storage function can be recognized by the prog-
ress bar in the status line. The progress bar indicates the remaining
storage duration.
Note
If the automatic storage function is activated, only the following keys
are active: Softkeys, <M>, <STO
and the automatic switch-off function are deactivated.
Proceed as follows to switch off the automatic storage function before
the adjusted storage duration has expired:
1
Press the <STO
The following window appears.
Warning
Stop automatic storage?
Yes
No
22.09.2009 08:00
2
Using < >< >, select Yes and confirm with <MENU/
ENTER>.
The meter switches to the measured value display.
The automatic storage function is terminated.
Remaining storage duration
Graphical display of the
storage duration
_
> and <On/Off>. The other keys
_
> key.
Multi 3410
ba75863e02
12/2009
Advertisement
Table of Contents
