Lists - wtw Multi 3410 Operating Manual

Multi 3410
Specialist terms
Adjusting
Asymmetry
AutoRange
Calibration
Electromotive force of
an electrode
Junction
Measured parameter
Measured value
ba75863e02 12/2009
8

Lists

This chapter provides additional information and orientation aids.
The glossary briefly explains the meaning of the specialist terms. How-
ever, terms that should already be familiar to the target group are not
described here.
Index The index will help you to find the topics that you are looking for.
Glossary
To manipulate a measuring system so that the relevant value (e. g. the
displayed value) differs as little as possible from the correct value or
a value that is regarded as correct, or that the difference remains with-
in the tolerance.
see zero point
Name of the automatic selection of the measuring range.
Comparing the value from a measuring system (e. g. the displayed
value) to the correct value or a value that is regarded as correct. Of-
ten, this expression is also used when the measuring system is adjust-
ed at the same time (see adjusting).
The electromotive force U of the combination electrode is the measur-
able electromotive force of an electrode in a solution. It equals the
sum of all the galvanic voltages of the combination electrode. Its de-
pendency on the pH results in the electrode function, which is charac-
terized by the parameters, slope and zero point.
The junction is a porous body in the housing wall of reference elec-
trodes or electrolyte bridges. It arranges the electrical contact be-
tween two solutions and makes the electrolyte exchange more
difficult. The expression, junction, is also used for ground or junction-
less transitions.
The measured parameter is the physical dimension determined by
measuring, e. g. pH, conductivity or D.O. concentration.
The measured value is the special value of a measured parameter to
be determined. It is given as a combination of the numerical value and
unit (e. g. 3 m; 0.5 s; 5.2 A; 373.15 K).
Lists
93