Advanced Operation; Correcting Folding Misalignment - Formax FD 3200 Instruction Manual

Chapter 3 Advanced Operation
1.

Correcting Folding Misalignment

Folding misalignment consists of "folding misalignment along the sides of the paper" and "folding
misalignment along the vertical length of the paper". Other than this, "deformed folding" may also occur due
to paper characteristics, etc.
Depending on the usage environment (temperature and humidity), paper type, thickness, paper grain
direction, trimming accuracy, and printing states folding misalignment may occur.
Adjusting fold misalignment on right and left sides
1-1.
When the folded paper is misaligned along
the sides, correct using the skew correction
knob of the paper feed tray.
1
Check that the paper feed guides are
set correctly.
Gaps between the paper and paper feed
guides will cause folding misalignment along
the sides to occur easily.
Proceed to step 2 if the paper feed guides are
set properly.
Perform test folding after resetting the paper
feed guides. Proceed to step 2 if folding
misalignment occurs after setting the paper
feed guides properly.
Do not put ngers inside during operation.
Keep away long hair, ties, jewelry and loose clothing.
It could cause injury.
Chapter 3 Advanced Operation
Ejection
direction
3-1