Table of Contents
Advertisement
8
Press the
key.
Returns to the top screen.
When [Last Fold] or [Stopper Fixed] is set, an
icon will be displayed on the LCD display.
When the [Stopper Fixed] is set, folding misalignment in the vertical direction occurs by
removing the folding plate with the power turned of. Be sure to press the cancel key and clear
key at the same time when turning on the power so that the forcible ejection will be performed.
7-8.
Test feed setting
The number of sheets that are fed for test feeding can be changed.
1
Press the menu key to display [Other
Setting].
2
Select [Test Feed Set] with the
key.
3
Press the
key.
The [Test Feed Set] screen is displayed.
4
Press the
key.
At this stage the numerical value can be changed.
5
Select the number of sheets with the
or
key.
Selected range : 1 to 3 sheets
6
Press the
key.
The selected numerical value is set.
7
Press the
key.
Returns to [Other Setting].
8
Press the
key.
Returns to the top screen.
LTR
+0.0/
Ready
[Last Fold]
or
Chapter 3 Advanced Operation
297
148.5/
Ready
0
[Stopper Fixed]
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
Other Setting2/5
Oper Mode
Test Feed Set
Power Save Set
Test Feed Set
No of Sht
Test Feed Set
No of Sht
0
2
3
3-27
Advertisement
Table of Contents
