Operation - Formax FD 38Xi Operator's Manual

OPERATION

1. Place power switch in the ON / "I" position.
2. Extend the catch tray as required.
3. FD 386 ONLY: Move the stacker wheels to the proper
position for the paper size (Fig. 6) (Refer to chart
below). Stacker wheels will automatically adjust on the
FD 38Xi.
8.5" x 11" 8.5" x 14"
Letter
Zig-Zag
Single
Gate
Fold Out
Double ll
4. Set the self-centering paper side guides for the width
of the paper and lock in position using thumbscrews.
Place a single sheet of paper between the guides
and move them in or out, until the paper slides freely
between them.
5. FD 38Xi ONLY: Adjust infeed tray tension lever (Fig. 8)
for different paper weights. Move the lever up towards
the "-" symbol for lighter paper and down toward the
"+" symbol for heavier paper. The middle position is for
standard paper weights.
6. Raise the infeed tray lever to lower the infeed tray.
7. Neatly stack paper on the infeed tray.
8. Lower the infeed tray lever to raise the infeed tray.
11" x 17"
A A or B
A A or B
B B
A B
B C
A A
B
Fig. 6
B
C
C
C
A or B
Fig. 7
Fig. 8
5
Stacker Wheel Positions A, B & C
Stacker Wheels
Self centering side guides
Operator side
Tension Lever