Table of Contents
Advertisement
Chapter 5 Trouble Guide
1.
Error Code
When an error occurs, error codes will be displayed on the LCD window as follows.
Check the error code or the error message and solve the problem by following the list below.
If the error persists or occurs frequently, contact your dealer.
1-1.
Warning error
Error
Error Message
Code
U010
Top Cover Open
U030
Fold Plate1 Err
U040
Fold Plate2 Err
U050
Suction Box Err
U060
Safety Lever Err
U100
Check the paper feed
tray.
Error Code
Error Message
Cause
The top cover is open.
Folding plate 1 is not attached.
Folding plate 2 is not attached.
Foreign particle is caught between
the paper feed tray and suction box.
Foreign particle is caught between
the paper feed tray and safety lever.
The safety lever is being kept pressed
down.
Back and forth of paper stacked
on the paper feed tray is not in
alignment.
[Sep. Air] is set to smaller value,
compared to paper type.
The stack height sensor is positioned
too low.
U***
Top Cover Open
Close the top cover.
Attach folding plate 1.
Attach folding plate 2.
Make sure that there is no foreign particle
on the paper feed tray.
Make sure that there is no foreign particle
under the paper feed tray.
Align paper.
Increase the setting value of [Sep. Air] by [5]
scales at a time.
Increase the value of stack height sensor
adjustment knob by one scale.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
Chapter 5 Trouble Guide
Solution
5-1
Advertisement
Table of Contents
