Table of Contents
Advertisement
7-12. Default setting
The setting contents such as speed or double-feed detection can be changed when [Normal] is set in the
[Oper Mode] setting.
1
Press the menu key to display [Other
Setting].
2
Select [Default Setting] with the
key.
3
Press the
key.
The [Default Setting] screen is displayed.
4
Select [Speed] with the
5
Press the
key.
At this stage the numerical value can be
changed.
6
Input numerical values on the keypad
or with the
or
Setting range : 0 to 6
7
Press the
key.
The selected value is set.
8
Select [D-Feed] with the
9
Press the
key.
At this stage [D-Feed] can be changed to [ON]
or [OFF].
10
Select [ON] or [OFF] with the
11
Press the
key.
The selected item is set.
or
key or
key.
key.
key or
key.
key or
key.
Chapter 3 Advanced Operation
Other Setting1/5
Feed Interval
Stack Roll Adj
Belt Convey Vol
Other Setting3/5
Alarm Setting
Detect OFF
Default Setting
Default setting
Speed
D-Feed
Default setting
Speed
D-Feed
Default setting
Speed
D-Feed
Default setting
Speed
D-Feed
5
OFF
3
OFF
3
OFF
3
ON
3-31
Advertisement
Table of Contents
