Table of Contents
Advertisement
Chapter1 Before Operation
2.
Names and Functions of Components
2-1.
External parts
[11]
[7]
[10]
[9]
[8]
No.
Name
[1]
Fold plate 1
[2]
Control panel
[3]
Separating air adjustment
[4]
Separator adjustment
[5]
Power switch
[6]
Skew correction knob
[7]
Side guide unit
[8]
Plate unit
[9]
Trail edge guide unit
[10]
Auxiliary paper feed tray
[11]
Paper feed tray
[12]
Paper feed guide
[13]
Guide ixing screw
[14]
Top cover
1-2
[14]
[13]
[12]
[7]
Guide plate for deciding the paper folding position.
Use this panel to enter information to operate the machine
For adjusting the separating air amount.
For adjusting the height of the separator.
Refer to Chapter 2 "1. Turning On/Of the Power"
Use this knob to correct the folding misalignment in both directions.
Use these guides to hold both sides of paper when stacking long size
paper.
Use this unit to send separating air toward the rear end of paper
when stacking long sheets of paper.
Holds the back edge of paper stacked on the paper feed tray.
For stacking paper on the paper feed tray in a stable condition. Do
not lean on the auxiliary paper feed tray or hold on to it to lift up the
machine.
For stacking the paper to be folded. Do not lean on the paper feed
tray or hold on to it to lift up the machine.
Holds both sides of paper when the paper is stacked on the paper
feed tray.
For securing the paper feed guide.
Safety cover to prevent the user from touching the moving parts.
[6]
[5]
Function
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
[1]
[2]
[3]
[4]
(p.2-1)
.
(p.1-7)
.
Advertisement
Table of Contents
