Deformed Folding - Formax FD 3200 Instruction Manual

Chapter 3 Advanced Operation
Registering the adjusted value
Adjustment values of folding misalignment in the vertical direction of thirty-six registration types including
six standard folding modes x six types of standard paper sizes can be registered. (Thirty registration types in
total including ive types of standard paper sizes for North America) Once adjustment values are registered,
folding operation can be performed in the same condition as the registration is made without registering the
same adjustment.
Register the values by press and hold the
sounds "pii" once and the adjustment value is registered.
To cancel the adjustment value already registered, set the adjustment value to [0] using the keypad,
or key and press and hold the
Adjusted folding stopper position can be registered to special folding.
The adjustment values cannot be registered for standard folding of non-standard paper.
1-3.

Deformed folding

The paper may not be folded properly due to the characteristics of paper. In such cases, check the following
points.
• Do not use paper outside the speciications.
Particularly, deformed folding occurs
frequently in the use of thin and limsy paper.
• Lower the processing speed when deformed
folding occurs for thin and limsy paper.
• Separate paper well prior to stacking.
• Stack paper on the paper feed tray after
aligning well, and set the paper feed guides at
the correct positions. Also tighten the ixing
screws of the paper feed guides irmly.
3-6
key after adjustment the folding plates 1 and 2. The buzzer
key. The buzzer sounds "pii" once and the adjustment value is registered.
(p.3-18)
(p.1-13)
(p.2-2)
(p.3-8)
or